To help you obtain the information you need more readily, we have compiled a list of answers to the most frequently asked questions and sorted these according to subject area.
Use our easy answer finder.
Select a topic, and then click on the relevant question to display the answer.
You can delete an application if a project was created using templates.
The templates contain a setup mask where the InitEraseEprom system variable is programmed. If you enter a "1" in this mask, the terminal application is deleted.
You can also use the pair of DIP switches on the back of the operating device to delete an application.
After "Download1", the "Deletion process" then appears on the terminal, indicating how the deletion occurred:
1. AUTO_DOWN = Automatic download
2. DIP_1+4 = Erase flash using DIP switches 1+4
3. SYS_ERASE = Erase flash from the application by means of the system variable.
Answer:
Yes, if the original download was authorized using the "Enable automatic upload" option under Project Management Information - System Parameters - General Parameters.
This S3 file cannot be disassembled (for .TSW). It can only be loaded in a device of identical design.
Answer:
You can work with 1 Hz and 2 Hz flash colors. The numbers 16 - 47 with 1 Hz and 48 - 63 with 2 Hz are defined under Project Management Information - Colors.
This function requires a TSwin version as of 2.33.
Answer:
There are either no handshake lines in the download cable or there is a cable break in the existing handshake lines.
Check the cable and replace if faulty.
Answer:
You can perform the required setting under Language - Language Parameters in the "Common" tab under Masks - Password.
Answer:
In addition, the FIFO buffer must be activated. You can activate the buffer in the operating system under the System Settings - System - Hardware - Device Manager - COM Ports - Properties - Advanced.
Some USB adapters do not support baud rate switching. In this case, you can use a USB adapter from Sütron.
Answer:
Before you can activate the "Compile" button in the Tools bar, at least one language and one controller must be entered in the project window under Project Management Information - Projects.
Answer:
The firmware in the operating terminal is more recent than the TSwin version.
Order a new TSwin version or contact a member of the support team by e-mail to have the firmware adjusted.
Answer:
Failure to transfer some individual messages to the history is caused by the different message parameters for the messages.
In general, each of the message parameters can be assigned to all messages. Go to Language - Messages and select all messages.
You can transfer the parameters for all messages using the right-hand mouse button and the Message Parameters entry.
Answer:
The SB file is a copy of the S3 file in a transfer-optimized format. In operating terminals equipped with a Compact Flash card, you can significantly reduce the required download time using this transfer procedure.
Answer:
An incorrect operating terminal type was programmed.
You must enter the correct terminal type in the TSwin tab "Project Management Information" under "General Information", with reference to the nameplate.
Answer:
An incorrect memory module was programmed for the operating terminal.
You must set the correct memory size in the TSwin tab "Project Management Information" under "General Information".
Answer:
1. The interface parameters in TSwin do not correspond to the operating terminal's active parameters -> Delete the terminal's memory and restart the download in TSwin with standard parameters.
2. PC interface is not released by another program -> Reboot the PC.
3. Download cable is either faulty or not inserted properly -> Check download cable.
4. The operating terminal's interface is faulty -> Replace the operating terminal.
5. PC interface is faulty -> Use another PC or replace the interface.
Answer:
The path specification for the S3 file under Project Management Information - Projects could not be found. Change the path specification.
If you enter only the name of the S3 file, the S3 file is automatically generated in the directory where the source file (TSW) is located.
Answer:
Use the OsLanguage system variable from the "Basic functions" system variable directory. The language switch is carried out with the language number of the language required.
Each project must have no more than one language number. The appropriate language number is available under the "Language Parameters" option.
Answer:
Select the "Message Parameters" entry from the context menu under Language - Messages.
Select the programmed message mask in the " Mask Change" selection box.
You must also activate the "When message appears" option.
Answer:
You must add the second language to the existing project in the TSwin tab "Project Management Information" under the "Projects" option.
Answer:
You can copy and rename an existing language in the "Project Management Information" tab under "Languages" or create a new language using the "New" button.
If you copy a language, you must adjust the language number under the "Language parameters" option.
Answer:
Once TSwin is installed, the TSwin directory contains a subdirectory with the name "FBs".
Example: "C:\Program Files\TSwin xxxx\FBs".
Answer:
Once TSwin is installed, the TSwin directory "C:\Program Files\TSwin xxxx\FBs\Profibus\TYP_GSD" contains the device data base (GSD) file.
Answer:
Once TSwin is installed, the TSwin installation directory contains a subdirectory called "Examples".
Sample files are available here for most operating terminals.
Answer:
You can select any variable name in TSwin. However, the address must have a particular syntax (structure), depending on the controller/protocol. This syntax allows the compiler to execute compilation without errors.
You can display the syntax in the online help under the "Syntax diagrams" topic.
Answer:
Libraries are used as templates to facilitate programming. You can open a library for the same operating terminal type while running your application.
A library contains elements that are already complete (such as system variables, graphical variable objects) that you can transfer to your own project together with all references. This should help to reduce the amount of time and effort spent on programming.
Answer:
A service program for installation is provided in addition to the TSwin programming software. This tool can be used to upload and download applications and recipe data sets.
The simple interface gives end users direct access to a tool that they can use to transfer their application changes implemented in the office to the application (S3 file) on site. In addition, the service tool can be used for backup purposes and downloading recipe data sets.
Answer:
Yes. To do so proceed as follows: From the Project Folder area, expand Project Management and select the project. Now select Terminal Ethernet Settings in the Properties window and enter the IP address you want to assign.
Answer:
For this purpose, call up the online help by pressing the F1 key. Enter the search string 'system variables' into the Index tab. The Index submenu that appears contains a detailed description of each system variable.
Answer:
For this purpose, call up the online help by pressing the F1 key. Enter the search string 'syntax diagram' into the Index tab. A list containing the available protocols is displayed. Now select the protocol you are using.
Answer:
The following two methods are available:
1. By using the Ethernet interface via a network or cross-over cable.
2. By using an USB flash drive.
In each case, you need to open the Transfer dialog after the translation has finished without any error .
Answer:
From the Project Folder area, select the Communication submenu. Now select the communication protocol you are using. In the Communication Parameters menu shown in the Properties window double-click the Edit button. A dialog appears allowing you to specify your specific settings.
Answer:
Select Additional Functions from the Project Folder area. The Date & Time menu displayed in the Properties window provides options allowing you to send and receive the date and the time. For details on this process refer to the online help.
