  |
|
| Special Features | TesiMod or TesiP@n touch and push-button operating unit on the fieldbus PROFIBUS-DP (additional fieldbus interfaces on request) Unicode-capable display Individual front design Complete solutions for the control cabinet Slide-in identification strips for logo field and push-buttons (bilingual key labeling possible) LED indicating proper bus operation Address referencing (bus system) can be set by DIP-switches Lamp test on power-up of the device Industrial-strength interface for downloads |
| Connection system | D-SUB male and female connector strips,
9 pin and 25 pin Connector strips Phoenix COMBICON, 3 pin Connector strips Phoenix MINI COMBICON 9 pin and 10 pin |
| Memory | 3 MB Flash for applications 512 KByte static CMOS-RAM, battery-backed CompactFlash card in the operating device and keypad |
| Supply Voltage | 19.2 to 30.2 V DC |
| Degree of protection | Fully sealed design IP65 (Front) Rear: IP20 |
| External dimensions of front panel | 530 mm x 348 mm x 4 mm (H x W x D) (20.866" x 13.701" x 0.157") |
| Certification, marks | CUL, CE, TÜV, UL, CCC (pending) |
| Technical data for touch operating unit | |
| Display | 5,7" 320 x 240 pixels STN monochrome, STN color, TFT color (further sizes on request) Display area: 115,2 x 86,4 mm |
| Touch screen | Resistive 4-wire touch screen |
| Power input | 0.4 A |
| Connected load | 10 W |
| Fuse | Semiconductor fuse, self-resetting |
| Technical data for push-button operating unit | |
| Keys | Exchangeable short-stroke keyboard with tactile feedback 106 switching cycles if operating force is 2-5 N Available with 16, 32 or 64 keys All keys with green and yellow backlighting Key labeling with slide-in strips Address assignment for keys is predefined, the bus station address is freely selectable |
| Inputs/outputs | In addition, 16 inputs and 16 galvanically isolated outputs (Imax 0.5 A, short-circuit proof and protected against polarity reversal) are available |
| Diagnostics | Diagnostic codes displayed on 7-segment display at rear of device Info display on power-up of device (start-up sequence, firmware version, communication driver, communication status) Info display during operation (communication status, error type display, error code, error subcode, firmware version, communication driver version, station number) |
| Power input | 0.4 to 1.1 A (depending on version) |
| Connected load | 26 W |
| Fuse | Semiconductor fuse, self-resetting |